Painting Treated Wood and How it Works

In comparing treated wood and untreated wood, you will find that the main difference between the two is that treated wood is impregnated with a waterborne preservative in a pressurized cylinder. This leaves a chemical residue on the wood but prevents fungi from infesting it. Basically, treated wood is a type of wood that has undergone a chemical preservative process. If you are looking to do a wood project and are looking for a highly durable material, treated wood is a top choice. Are you wondering if you can be creative and paint treated wood for your project to add style? You certainly can.

When it comes to painting treated wood though, there is actually a preparation process you will want to do before going into painting the wood. The overall process of painting treated wood can be time-consuming so if you prefer something hassle-free, then it would be good to select a professional service group like Townsville Carpenters to assist you. If you are open to the time it takes, the overall process can come off rather simple as well.

What Does Prepping Treated Wood For Painting Mean

With treated wood, you’ll find that upon purchasing them, it is still “wet” as liquid chemical preservatives are still present in the lumber. This causes the wood to feel extremely heavy, and damp to the touch so you will want to have the material go through a drying process. If you attempt to paint the wood without fully dying it, your coat of primer or paint will most likely be rejected by the water-borne chemicals slowly bleeding their way out of the lumber.

The drying of treated wood can be a slow process but the process will occur naturally as the liquid preservative works its way back to the surface of the wood. You have the option to have it possibly dry quicker by exposing it to heat or sunlight but this can cause a risk of the wood gaining an unexpected warp. So long as the wood is not left in a damp and dark space, the drying process should run smoothly.

One way you can tell that your treated wood has dried is that it will take on a light yellow-brown color. When still wet, it will be green and dark. A more concrete way to tell when treated wood is fully dry is to dab a few drops of water onto your treated wood and see if it will seep into the wood. If the water beads on the surface, it would be best to leave it out drying for a longer time. During this drying period, you can also prep the area by cleaning it with soap and water to remove dirt and debris for your project.

Process of Painting Treated Wood

The painting process of treated wood does not hold that much difference from painting untreated wood. When applying the primer first, you will want to use a good exterior-grade primer on your treated wood. You will want to allow the primer to cure for the time specified by the manufacturer. Once this is done, apply a coat of exterior latex paint and paint at least two coats. If you’d like to have better paint adhesion, you can lightly sand with 220-grit/extra-fine sandpaper between each coat.

How Townsville Carpenters Can Help

The overall process of prepping your treated wood for any wood project can be a lot of labor. If you’d like your painting done hassle-free plus have assistance with any carpentry project, calling for a professional service group like Townsville Carpenters is an option to have. Townsville Carpenters is a professional service that delivers hard work, quality craftsmanship, and great communication with its customers. If you are looking for something that can make painting your treated wood more convenient, having this option can be helpful.

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest

Leave a Reply

Your email address will not be published.